延误航班停机坪作业运行控制研究

随着航班航次的增加，机场变得越来越繁忙．地面作业操作不当所导致的飞机地面事故日益增加：在介绍航班停机坪作业的基础上，分析了地面作业的特点，在此基础上，根据航班延误时在作业资源充足和不足情况下，研究了航班停机坪作业的一般方法。在资源充足情况下，航班延误的地面作业控制主要采用AOE方法，缩短关键路线的作业时间。而资源不足情况下，除了控制关键路线作业时间外，还要根据排序算法合理分配关键作业的资源，以实现缩短延误时间的目的。     

航电系统的处理机重构算法与实现

主要阐述了满足新一代航空电子系统中核心数据综合处理要求的实时操作系统 ;概述了系统软件的三个主要层次的总体结构 ;着重论述了重构处理机的问题 ;并详细讨论了处理机容错重构处理的实施过程。     

导弹撞地概率对参数选择的影响

研究了巡航导弹的撞地概率和系统参数选择的关系问题。首先在考虑了地形随机输入和低空风随机干扰共同作用的情况下，推导了撞地概率的计算方法。其次以导弹主要参数（ａ２４和Ｋｈ）的选择为例，在给定条件下求出了它们和撞地概率的关系曲线，并分析了它们对撞地概率的影响。研究结果表明，协调选择ａ２４和Ｋｈ等参数，能有效降低撞地概率，提高巡航导弹的作战效能。     

飞机带外挂对称结构振型局部化的参数影响

本文在文〔１〕研究的基础上，详细分析了飞机左右对称子结构间的耦合度以及外挂联接刚度失调量的大小等因素对振型局部化程度的影响。通过具体的数据揭示了各参数对局部化程序的影响规律。     

基于深度增强学习的卫星姿态控制方法

针对卫星在执行丢弃载荷或捕获目标等复杂任务时遭遇的姿态突然发生变化的问题,采用深度增强学习方法对卫星姿态进行控制,使卫星恢复稳定状态。具体来说,首先搭建飞行器的姿态动力学环境,并将连续的控制力矩输出离散化,然后采用Deep Q Network算法进行卫星自主姿态控制训练,以姿态角速度趋于稳定作为奖励获得离散行为的最优智能输出。仿真试验表明,面向空间卫星姿态控制的深度增强学习算法能够在卫星受到突发随机扰动后稳定卫星姿态,并能有效解决传统PD控制器依赖被控对象质量参数的难题。所提出的方法采用自主学习的方式对卫星姿态进行控制,具有很强的智能性和一定的普适性,在未来卫星执行复杂空间任务中的智能控制方面有着很好的应用潜力。     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

基于改进粒子群优化模糊控制的MPPT算法研究

在光照强度和温度变化时,常规的最大功率点跟踪(MPPT)算法难以快速准确地跟踪光伏系统最大功率点。针对此问题,设计了一种改进粒子群优化算法(PSO)的模糊控制器。首先,依据常规MPPT特性,设计了一种带调整因子的模糊控制算法以快速收敛到最大功率点；然后,采用参数自适应PSO对设计的模糊控制器调整因子进行动态优化。仿真结果表明:所设计的参数自适应PSO优化模糊控制器能快速准确地跟踪最大功率点,保证了MPPT的动态响应速度和稳态精度,提高了光伏系统的工作效率。     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

基于MapReduce的CME参数识别模型并行计算技术

日冕物质抛射（Coronal Mass Ejection，CME）参数识别模型是太阳风预报过程的重要组成部分.在空间环境预报业务中，为提高太阳风预报的准确率，需要提高CME参数识别的精度.模型以计算任务串行的方式运行，运算效率低导致模型运算时间长，不能满足这种需求.CME参数识别模型的物理运算过程相互不独立，其在单节点上的运行方式不能满足并行化要求.基于MapReduce的并行计算框架，改进了CME参数识别模型的计算流程，提出CDMR（CME detection under MapReduce）方法，实现了CME参数识别模型的并行计算，并对比分析CME参数识别模型在串行计算和MapReduce并行计算下的运行时间，提高了模型的识别精度和计算效率.      

基于新陈代谢GM（1,1）模型的导弹遥测故障预测算法

在人工监视遥测关键参数是否超出阈值范围以判断导弹故障的传统模式基础上,对GM（1,1）预测模型进行了改进,研究了基于新陈代谢的GM（1,1）预测算法对遥测参数实时预测效果.该算法能不断去掉最老的信息,充分利用最新的信息,避免了预测模型老化的现象;由于用于预测的数列维度较少,便于计算,能够保证算法的实时性.用MATLAB编程实现算法,比对实测数据的预测值与实际值,并进行误差分析.结果表明,该算法对遥测参数的预测精度较高,可为及时发现导弹故障提供科学的依据.